.TH LWCAT 1 "25 March 2009" "plt 2.5" "WFDB Applications Guide"
.SH NAME
lwcat \- postprocess output of plt to make PostScript, EPS, PDF or PNG
.SH SYNOPSIS
\fBplt -T lw\fR ... \fB| lwcat\fR [ \fIoptions ...\fR ]
.SH DESCRIPTION
.PP
\fBlwcat\fR collects the PostScript output of \fBplt\fR(1) and adds a prolog
and epilog to create a complete PostScript document (or another format, if
appropriate options have been selected). It is possible to concatenate
the outputs of two or more \fBplt\fR runs to be processed as a single
job by \fBlwcat\fR; see the \fIplt Tutorial and Cookbook\fR for details.
.SS Output format
.PP
By default, \fBlwcat\fR sends its output directly to the default printer
via \fBlpr\fR. These options may be used to modify this behavior:
.TP
\fB-ps\fR
Write PostScript to the standard output (not to the printer).
.TP
\fB-psv\fR
Write PostScript to a temporary file and view it with \fBgv\fR (ghostscript).
.TP
\fB-gv\fR
Same as \fB-psv\fR.
.TP
\fB-eps\fR
Write EPSF (encapsulated PostScript format) to the standard output. Note
that this is only a close approximation to EPSF; it is acceptable to LaTeX's
epsfig package, at least.
.TP
\fB-pdf\fR
Write PDF (portable document format) to the standard output.
.TP
\fB-png\fR
Write PNG (portable network graphics) format to the standard output.
.PP
In general it is not useful to combine two or more of the options above, with
the exception of \fB-eps\fR and \fB-gv\fR (or \fB-psv\fR). In most other
cases, only the last such option has any effect.
.SS Window options
.PP
By default, the output appears within a 6.75x6 inch (171x152 mm) window,
the lower left corner of which is positioned 1 inch (25.4 mm) from the
left edge and 3.5 inches (89 mm) from the bottom edge of the page. The
following options may be used to modify the size, location, and orientation
of the output:
.TP
\fB-landscape\fR
Use landscape mode (rotate plot 90 degrees counterclockwise).
.TP
\fB-sq\fR
Plot in a 6x6 inch (152x152 mm) square window, 1.25 inches (32 mm) from the
left edge and 3.5 inches (89 mm) from the bottom edge of the page.
.TP
\fB-t\fR
Plot in a 6.25x6.25 inch (159x159 mm) square window, positioned as for
\fB-sq\fR.
.TP
\fB-t2\fR
Plot in a 6.25x4 inch (159x102 mm) window, positioned as for \fB-sq\fR.
.TP
\fB-CinC\fR
Plot in a 4.75x3.15 inch (121x80 mm) window, positioned as for \fB-sq\fR.
.TP
\fB-sq2\fR
Plot in a 4.5x5.5 inch (114x140 mm) window, 2.5 inches (63 mm) from the left
and bottom edges of the page.
.TP
\fB-v\fR
Plot in a 7x9.5 inch (178x241 mm) window, 0.75 inches (19 mm) from the left
and bottom edges of the page (centered on a US letter sheet).
.TP
\fB-v2\fR
Plot in a 7x8.5 inch (178x216 mm) window, positioned as for \fB-v\fR.
.TP
\fB-va4\fR
Plot in a 190x275 mm window, centered on an A4 sheet.
.TP
\fB-full\fR
Plot in a 7.5x10 inch (191x254 mm) window, centered on a US letter sheet.
.TP
\fB-slide\fR
Plot in a 7.5x5 inch (191x127 mm) window, 0.5 inches (12.7 mm) from the left
edge and 3 inches (76 mm) from the bottom edge of the page (3:2 aspect ratio,
as for 35 mm slides).
.TP
\fB-screen\fR
Plot in a 7.5x5.625 inch (191x143 mm) window, 0.5 inches (12.7 mm) from the
left edge and 2.375 inches (60 mm) from the bottom edge of the page (4:3
screen aspect ratio).
.TP
\fB-golden\fR
Plot in a 7.5x4.635 inch (191x118 mm) window, 0.5 inches (12.7 mm) from the
left edge and 3.365 inches (85 mm) from the bottom edge of the page
(the aspect ratio is approximately the "golden ratio", (1+sqrt(5))/2 = 1.61803
...).
.TP
\fB-strip\fR
Plot in an 8x0.8 inch (203.2x20.3 mm) window, 0.5 inches (12.7 mm) from the
left and bottom edges of the page
.TP
\fB-custom\fI [ width [ height [ left [ bottom [ font-scale ] ] ] ] ]\fR
Plot in a custom-sized window. Up to five parameters can be given to specify
the width, height, and margins (in inches) and the font scaling factor. All
of these parameters must be positive (if an argument beginning with '-' is
given, \fBlwcat\fR treats it as a normal option and uses defaults for
any missing parameters). Defaults: width = 5 inches, height = width, left
margin = 0, bottom margin = left margin, font scale = 1.
.PP
Other window options can be easily added; see the source for \fBlwcat\fR
for details.
.SS Copies
.PP
.TP
\fB-c\fIn\fR (where \fIn\fR is 2, 3, 4, 5, or 6)
By default, \fBlwcat\fR prints a single copy. Multiple copies can be
produced using the options \fB-c2\fR, \fB-c3\fR, \fB-c4\fR, \fB-c5\fR, and
\fB-c6\fR; when using a PostScript printer, this will almost always be much
faster than rerunning \fBlwcat\fR, since the document is downloaded and
rasterized only once when using these options. To print more than 6 copies,
repeat or combine these options as needed.
.TP
\fB-no\fR
Send the output to the printer, but don't eject the page (use this option
if you wish to overlay the output with additional material to be produced by
another program).
.SH FILES
.TP
\fB/usr/bin/epstopdf\fR
Converts EPS to PDF if \fB-pdf\fR is used (from a TeX distribution such as
tetex or texlive)
.TP
\fB/usr/bin/gvcat\fR
Directs output to a PostScript viewer (such as gv or evince)
if \fB-gv\fR or \fB-psv\fR is used
.TP
\fB/usr/bin/makeplthead\fR
Generates the PostScript header and bounding box for EPS output
.TP
\fB/usr/bin/pltpng\fR
Directs output to (ImageMagick's) \fBconvert\fR if \fB-png\fR is used
.TP
\fB/usr/lib/ps/plt.pro\fR
PostScript prolog
.SH SEE ALSO
.PP
\fBplt\fR(1)
.SH AVAILABILITY
\fBlwcat\fR is available as part of the \fBplt\fR package in
PhysioToolkit (see \fBSOURCE\fR below) under the GPL.
.SH AUTHORS
Paul Albrecht and George B. Moody (\fBgeorge@mit.edu\fR)
.SH SOURCE
\fBhttp://www.physionet.org/physiotools/plt/src/lwcat\fR