The Print setup window

\begin{figure}\centerline{\epsfig{file=print-setup-window}}
\end{figure}
Open this window by selecting Print setup from the \ovalbox{\rule[-.3mm]{0cm}{2.5mm}\small\sf ~File~\ensuremath{\nabla}~} menu.

PostScript print command
WAVE supplies any PostScript data to be printed (such as the chart generated when you choose Print from the \ovalbox{\rule[-.3mm]{0cm}{2.5mm}\small\sf ~File~\ensuremath{\nabla}~} menu) to the standard input of this command.

Text print command
WAVE supplies any text to be printed (such as on-line help) to the standard input of this command.

The initial settings in the Print setup window are determined by the environment variables PSPRINT and TEXTPRINT; if either of these variables is not set, the corresponding command is determined by the PRINTER environment variable (see Setting up a printer for WAVE ). You may change these commands (for example, to specify use of a different printer). When executing commands from its menu file, WAVE replaces the strings $PSPRINT and $TEXTPRINT with the corresponding commands from the Print setup window (see Menu Variables).

George B. Moody (george@mit.edu)
2019-03-08